Posts

How to Honing A Single Acting Cylinder Barrel ?

Image
  Cylinder barrel or cylinder bore quality plays a huge role in reducing friction and blow by for improved hydraulic cylinder performance and durability. Better bore geometry also contributes to better sealing and more usable power. Hydraulic cylinder honing is the process of smoothing the internal surface of a cylinder by using an abrasive tool to remove any imperfections. The process involves rotating an abrasive honing tool in the cylinder bore while moving it up and down. The honing process removes any high spots and creates a crosshatch pattern on the cylinder walls. This improves the seal between the piston rings and the cylinder wall. To hone a single acting cylinder barrel, It will need an abrasive honing tool and a tailored machine. First, you need to attach the honing tool to the honing machine and set the machine to the appropriate speed. Then, insert the honing tool into the cylinder bore and start the machine. Move the honing tool up and down while rotating it in the cy
Post a Comment
Read more

Anbao Hydraulic/Chrome Plated Bar/Induction Hardened /4340 4130 4140 Cyl...

Image
Post a Comment
Read more

How To Choose The Cylinder Barrel Materials

  The  cylinder barrel   in which the piston operates must be made of a high-strength material, usually steel. It must be as light as possible, yet have the proper characteristics for operating under high temperatures. It must be made of a good bearing material and have high tensile strength. The cylinder barrel is made of a steel alloy forging with the inner surface hardened to resist wear of the piston and the piston rings which bear against it. This hardening is usually done by exposing the steel to ammonia or cyanide gas while the steel is very hot. The steel soaks up nitrogen from the gas, which forms iron nitrides on the exposed surface. As a result of this process, the metal is said to be nitrided. This nitriding only penetrates into the barrel surface a few thousands of an inch. As the cylinder barrels wear due to use, they can be repaired by chroming. This is a process that plates chromium on the surface of the cylinder barrel and brings it back to new standard dimensions. Chr
Post a Comment
Read more

How To Choose The Cylinder Barrel Materials

Image
  The  cylinder barrel   in which the piston operates must be made of a high-strength material, usually steel. It must be as light as possible, yet have the proper characteristics for operating under high temperatures. It must be made of a good bearing material and have high tensile strength. The cylinder barrel is made of a steel alloy forging with the inner surface hardened to resist wear of the piston and the piston rings which bear against it. This hardening is usually done by exposing the steel to ammonia or cyanide gas while the steel is very hot. The steel soaks up nitrogen from the gas, which forms iron nitrides on the exposed surface. As a result of this process, the metal is said to be nitrided. This nitriding only penetrates into the barrel surface a few thousands of an inch. As the cylinder barrels wear due to use, they can be repaired by chroming. This is a process that plates chromium on the surface of the cylinder barrel and brings it back to new standard dimensions. Chr
Post a Comment
Read more

The Important Cautions when installing large bore cylinder

 Large bore cylinders play a very prominent role in the industrial field like  Shipbuilding, offshore oil & gas engineering. Anbao Group as a top specialist in hydraulic cylinder production ,not only we could manufacture all kinds of custom hydraulic cylinder according to the drawing from our customers,but also we could make a design according to customer’s requirements,and with rich experience in how to install large bore cylinders, Here are a few things to note； 1. Clean large oil tanks and surrounding environment. The fuel tank should be well sealed, and the pipes and tank should be cleaned to prevent other iron pieces and debris. Special paper should be used when cleaning, and hemp rope and adhesive should not be used as sealing materials. Hydraulic oil should be designed as required, paying attention to the temperature and changes of the hydraulic oil; 2. When disassembling a large cylinder, it is strictly forbidden to damage the top thread of the cylinder rod , the thread
Post a Comment
Read more

Anbao Group/Hydraulic Cylinder Supplier/OEM Hydraulic Cylinders/Customized Cylinder Design

Image
Post a Comment
Read more

The Salt Spray Test Hours For CK45 Induction Hardened Chrome Rod

  CK45 Induction hardened chrome rod is the main component of engineering hydraulic cylinders,as a professional manufacturer in this field, Anbao Hydraulic uses its unique and proprietary chrome plating method to produce hydraulic cylinder piston rods that are more dimensionally uniform and far more corrosion resistant than those produced by conventional processes. We offers chrome cylinder rod with 3 kinds of heat treatment type : 1) Normal no heat  2)Q+T(Quenched+Tempered) 3)Induction Hardened chrome plated bars with an increasing range of corrosion resistance as tested against the standard ASTM B117 neutral salt spray for between 24 and 1000 hours as client's requirements. Delivery condition of Anbao CK45 Induction Hardened Chrome Rod Hard Chrome Piston Rod Quenched & Tempered (Q+T) Rod Induction Hardened Rod Q+T Induction Hardened Rod Corrosion resistance: Test in natural salt spray according to ASTM B 117-96 hours.
Post a Comment
Read more