Posts

Showing posts with the label cold drawn seamless tubing

The Production Method Of Seamless Cold Drawn Precision Tubes According To EN-10305-1 DIN 2391

  Seamless cold drawn precision tube according to EN 10305-1 (DIN 2391), with narrow tolerances, a good surface and special mechanical properties. After the heat treatment +N (NBK) the tubes can be cold formed (bending). Cold drawn seamless tube and pipe is produced by piercing hot billets and subsequent rolling which reduces their diameter and elongates them. This material is then passed through a die and over a mandrel plug to produce an accurate size and gauge which is the essence of the cold drawing process. Outside diameter : EN 10305-1 (DIN 2391) Material : E235 (St. 35) / E355 (St. 52) Version : +C (BK) No heat treatment after cold drawing, cold forming very restricted. : +N (NBK) (annealed) Suitable for cold forming Straightness deviation : Outside diameter > 15 mm = 0,25% of the length Outside diameter 6 - 15 mm (straightened by the eye) Outside diameter < 6 mm = no guarantee for the straightness Wall thickness tolerance : +/- 10% Applications Of Seamless Co...

Anbao Hydraulic/Cold Drawn Cylinder Barrels/ honed barrel/Cold Drawn Seamless Tubing

Image

Drawn Over Mandrel Tubing vs Cold Drawn Seamless Tubing

  Cold Drawn Seamless Tubing(CDS) and Drawn Over Mandrel Tubing (DOM) are the most two kinds steel tubes in many kinds of industry applications. Drawn Over Mandrel Tubing (DOM)is a cold drawn ST52 /1026 electric resistance welded tube with all of the flash removed prior to cold drawing. In comparison to traditional electric welded tubing, DOM tubing is produced to extremely tight OD and ID tolerances. This type of tubing is also known to have the highest weld strength possible. DOM’s tight tolerances, concentricity, and superior surface quality on the OD/ID surfaces make this type of tubing very cost-effective. The tubing’s close tolerances allow for this mechanical tubing to be used with little to no downstream processing. Cold Drawn Seamless Tubing (CDS) is a cold drawn ST52/1026/4140 steel tube. Produced from hot rolled   material. The cold drawing process increases the material's physical properties and offers tighter tolerances compared to hot-rolled products. CDS is ...