Posts

Showing posts with the label hard chrome plated bar

The Application Of 1045 4140 Hard Chromed Bar

Image
  Hard chromed bar is a chromium-plated steel product used primarily as piston rod material in all standard applications in hydraulics and pneumatics. Common applications are found in cranes, dump trucks, lifters, garbage compactors, agricultural machinery and production equipment with movable sections. Because hard chromed bar is normally used in conditions of high stress, friction and harsh climatic environment, the quality of the base metal and surface treatment are of paramount importance. Wear, impact and corrosion resistance, as well as high yield strength, surface smoothness and uniform quality are most important properties of hard chrome bar. The basic grades of steel used in the hydraulic filed are 1045, 4140 hardened and tempered,1045 induction hardened. Grade 1045 induction hardened chrome steel bar is primarily used in hard chrome bar manufacture due to its wide range of properties consistent with end use applications. Grade 4140 is used in applications where greater y...

How to prevent the corrosion of chrome plated bar?

  How to prevent the corrosion of chrome plated bar? Prevention of corrosion extends beyond just the manufacture of the chrome plated bar. Handling and storage of the chrome bar can dramatically affect corrosion resistance. Ensure the protective fiber tubing does not get moist or wet with water or other contaminants. Remove any wet fiber tubes from rods or tubes and dry the rods or tubes immediately. When transporting chrome plated rods or tubes between operations, do not leave them in contact with surfaces that may contain coolants, lubricants, cleaning agents, or other sulfur or chlorine containing surfaces. Do not transport in loose quantities that can contact one another. Point impacts can damage the integrity of the chrome plate and eliminate corrosion resistance. Do not leave rods or tubes unprotected between operations or during transfer between buildings, if the transfer is over an extended period of time. A light oil film should be applied. Do not place unprotected ...

How do you straighten a hydraulic cylinder piston rod?

Image
  Hardness measurement of  hydraulic cylinder piston rod  is usually divided into two kinds: destructive measurement and non-destructive measurement. Nondestructive measurements are less damaging and cannot be completely damaged. This injury is fatal in comparison to a piston rod, and therefore can only be done by destructive measurements. Piston rods sometimes deform after nitriding. At this time, has reached the finished size requirements, and the surface hardness is very high. It cannot be refined by processing methods. Only the straightening method can be used to control the deformation at a reasonable level. In the range. Commonly used pressure straightener, whether hot or cold, its straightening accuracy is artificially affected, can reach 1 to 2 mm. Usually, the bending deformation of some products after the nitriding of the piston rod is 0.1 to 0.3mm, so the deformation is very small and can not meet the requirements of the pressure correction machine. Bending and...

Advantages of chromed piston rods and heat treatment

Chromed piston rods  are manufactured to meet the needs of the market. They have the guiding function of sliding bearings and can realize the linear motion of objects. The prerequisites for these linear motion systems are: simple design, quick execution capability, low maintenance cost, strict selection of durable materials, high frequency heat treatment, accurate outer diameter size, roundness, straightness and Surface treatment, etc.   Due to the poor rigidity of the precision piston rod itself, many unexpected problems occur during the turning process. The slender shaft of the car is a difficult machining process. Although the slender shaft of the car is more difficult, it also has certain regularity. It mainly grasps the use of the center frame and the tool holder, solves the thermal deformation elongation of the workpiece and rationally selects the geometry of the turning tool. It was solved.   In order to prevent the thermal deformation of the precision piston rod, ...

42CrMo4 (EN 10083-3) Preperties And Applications

Image
42CrMo4  (EN 10083-3)   is the most commonly used quenched and tempered steel because of its high property/cost relationship. It has high hardenability, good heat resistance, excellent forging and machine tool cutting. Surface hardening or nitriding can improve wear resistance and fatigue strength. Hardened, tempered and nitrided gears can be substituted for surface hardened and hardened gears if they do not yield to excessive pressure. Anbao Group  specialized in manufacturing 42CrMo4 hard chrome bar,  cold drawn seamless steel pipe , we have more than 23 years experience in manufacturing, we also supply  honed cylinder tube  and  chrome piston rod , any needs please  contact us

1045 Hard Chrome Plated Bar

Image
1045 hard chrome plated bar  is used extensively by the hydraulic and pneumatic industries, and is employed by other industry sectors for a wide range of applications.1045 is a medium tensile carbon steel supplied in the cold drawn or turned, precision ground, polished, chrome plated and final polished condition, with a typical base metal tensile strength of 670 – 800 Mpa, plus a typical hard chrome plated surface hardness of HV 1000 – 1150. Characterized by an extremely smooth surface finish with excellent wear and corrosion resistance, coupled with a base material giving good strength and impact properties, plus good machinability and reasonable weldability. Typical applications are: Agricultural Equipment, Compressors, Car Jacks and other Transport Lifting equipment, Food Processing Equipment, Hoists, Mining and other Earth Moving Equipment, Machine Tools, Mechanical Tools and Equipment, Rods and Shafts (Various), Waste Disposal Transport and Equipment etc.   Machining 1045...

Induction Of quenched and tempered 4140 chrome plated steel rod

Image
4140 chrome plated steel rod  is a special kind of hard chrome rod, because the material is 4140 steel, so this kind of hard chrome rod is called 4140 chrome plated steel bar. The familiarity and understanding of this product is to use the product correctly and reasonably, and further, it can have a good use effect on the use of the product.   1.How to purchase 4140 chrome plated steel rod? The first thing to know about the purchase of 4140 chrome plated steel bars is that this is an important task that needs to be taken seriously and treated seriously. In the purchase process, all relevant factors need to be taken into account, including product origin, parameters, quality, price and manufacturer, etc., if necessary, also need to consider the product use environment and use requirements. After all the relevant factors are considered comprehensively, it is possible to have an accurate judgment and, in turn, select the appropriate product.   What are the requirements for t...

What is the application of a double acting hydraulic cylinder

Image
Double acting hydraulic cylinder  is a very common hydraulic cylinder type which means both oil ports with oil entering and both directions controlled by oil pressure. When piston rod works, the force of pushing is bigger than pulling, and the piston rubs with the inside barrel thousands of times so if the seal ring is not good enough, leaking will happen after a time,  Anbao Group  double acting hydraulic cylinder picks the best match for rod and bore and takes clients’ requirements as well. Anbao double acting hydraulic cylinder usually takes superficial treatment to the piston rod like surface hardening or chrome plate to make the surface fine and smooth so that can lengthen the rod’s working life. Besides, As the piston has to fit with the bore accurately, We take special treatment to the seal ring surface so as make it move smoothly. A double acting hydraulic cylinder is a cylinder where the working fluids act on both sides of ...

Quenched / Tempered Induction Hardened Piston Rod

Image
Quenched / Tempered Induction Hardened Piston Rod The piston rods are induction hardened with Q&T. After induction hardening with Q&T, the piston rods could not only obtain greater mechanical properties, but also achieve a greater resistance to damage from external impact. Induction hardening with Q&T consists of a two-stage heat treatment process. Stage 1, the piston rods are quenched and high-temperature tempered to adjust the mechanical properties of the steel. Stage 2, the piston rods are induction hardened in order to increase the resistance to damage from external impact in applications where there is risk for them. The induction hardening process creates a very hard, wear resistant surface while maintaining the proper toughness in the majority of the object. Anbao Hydraulic is a professional manufacturer in hydraulic cylinder  and assembly products , we have more than 23 years experience, honed tube , hard chrome bar , hollow chrome bar are also ou...

Increasing the resistance to buckling of piston rods through induction hardening

Image
Hydraulic cylinder piston rods are induction hardened in order to increase the resistance to damage from unanticipated external impact in applications where there is risk for such; examples are piston rods for hydraulic cylinders in excavators and loaders and for power-steering cylinders. An additional advantage afforded by induction hardening is improved resistance to inadvertent handling damage during cylinder manufacture. Induction hardening of hydraulic cylinder piston rods engenders not only a protection from damage in the event of external impact but also improves the mechanical properties of the rod and in particular, the resistance to buckling failure in push mode. This increase in buckling resistance can be accounted for by considering the rod as a composite material with a tube of hardened steel surrounding a solid core. Consequently, in relation to a non hardened rod with the same steel base, the diameter of an induction-hardene...

How To Make Chrome Plated Rod

Image
Chrome Plated Bars are produced from medium carbon cold-finished or hot rolled steel bars usually in 1045/1050 or 10v45 grades. The bars are centerless ground, polished, and chrome plated to a minimum thickness of 0.0005”, and 0.001” per side. Chrome Plated bars are specifically designed to be used for most piston rod applications in hydraulic and pneumatic cylinders . Common grades AISI 1045/1050 steel (or 10v45.) Typically meets ASTM A108, A311 class B Metric sizes available Stocked in 12’ – 24’ lengths Cut to length service available Hard chrome plated thickness per side: minimum thickness .0005” (.0127mm), .001” (.0254mm) Precision tolerances and surface finish. Custom made diameters and chrome thickness available upon request Offered in minimum yield strengths of 75k and 100k. Hardness of Rc 60-72, and a surface finish of 16 Ra maximum

Hard Chrome Plated Rods/Chrome Plated Bars/Induction Hardened Rods

Image
Hard chrome plated bar is our hot selling product . We can supply these Bars of any Grade of Material. Our Range of Products is made up from Superior Quality of Raw Material and is being Offered at Market Leading Prices. .These Bars are Extensively Recognized for Optimum Performance and Robust Construction. Our Products are also Widely Appreciated for their Elegant Finish, Resistance from Corrosion and Durability.Hard Chrome Plating is an Electrolytic Method of Depositing Chrome to Engineering Applications, from a Chrome Acid Solution. Hard Chrome can be Deposited Successfully and Advantageously onto most Metallic Substrate Materials. Induction Hardened Chrome Plated Bars :  Induction Hardened Chrome Plated Bars are produced by using advanced processing techniques usually on AISI 1045/1050 or 10v45 steel rods, for surface removal, polishing, induction hardening, followed by hard chrome plating to a thickness minimum of 0.0005” or 0.001” per side. The finished p...