The Suitable Material For Unhoned Cylinder Tube

 Unhoned cylinder tube is a kind of Semi-finished cylinder tube,Unhoned cyinder tube also can be called cold drawn seamless tube or pre-honed tubes.

Anbao Hydraulic as a professional manufacturer of cylinder barrels and cylinder rods.We offer a large range of ST52 cold drawn seamless
and hot finished unhoned cylinder tubes suitable for honing.
The normally material is made from ST52 or ST52.3 & E355 cold drawn seamless & hot finished tube.

Advantage of Our Unhoned Cylinder Tubes

1)Professional & skilled, reliable.
2)One-stop total solution
3)ready stock goods with fast delivery
4)Customizable: Non-standard sizes are also available
5)Small quantity is acceptable
6)Cash back: Refund or replacement for any product faulty

unhoned cylinder tube


Comments

Post a Comment

Popular posts from this blog

How To Choose The Cylinder Barrel Materials

Image
  The  cylinder barrel   in which the piston operates must be made of a high-strength material, usually steel. It must be as light as possible, yet have the proper characteristics for operating under high temperatures. It must be made of a good bearing material and have high tensile strength. The cylinder barrel is made of a steel alloy forging with the inner surface hardened to resist wear of the piston and the piston rings which bear against it. This hardening is usually done by exposing the steel to ammonia or cyanide gas while the steel is very hot. The steel soaks up nitrogen from the gas, which forms iron nitrides on the exposed surface. As a result of this process, the metal is said to be nitrided. This nitriding only penetrates into the barrel surface a few thousands of an inch. As the cylinder barrels wear due to use, they can be repaired by chroming. This is a process that plates chromium on the surface of the cylinder barrel and brings it back to new standard d...
Read more

The hard chrome plating process of Anbao cylinder rod

 Hard chrome plating, also known as hard chromed , is a technique of electroplating that applies a thin layer of chromium onto a cylinder piston rod . Chrome plating is used to provide a working surface that requires one or more of the following characteristics: to reduce friction, resist abrasion, or increase corrosion resistance. It is very hard, measuring between 66 to 70 HRC.  Surface defects and roughness are amplified because hard chrome does not have a leveling effect. Friction between a Anbao cylinder rod and its seals, and the resulting wear, has a crucial influence on the efficiency and service life of a hydraulic cylinder . Chrome plating is a cost-effective repair option that can allow salvage of a cylinder rod, cylinder tube , or valve spool instead of replacing it with new. In addition to the cost benefits, chrome plating also creates a hardened wear surface, extending the life of most high wear areas resulting in longer run times between repair or re...
Read more