The Common Materials Of Honed Barrel Tube For Hydraulic Cylinders

Honed barrel tube is well known as hydraulic cylinder tube in many industries. This is because honed tubes are the most important materials of manufacturing hydraulic cylinders. And as this kind of tubing is usually honed in tube inside diameter, it is known as honed ID tubing also.

The honed cylinder tube suitable for various kinds of Precision Mechanical Tubes,Hydraulic Cylinder Tube and Pneumatic Cylinder Tubes, Stainless Steel Cylinder Tubing, Construct use Multi Joint Tube, Steel Axis Pipe, Injection Machine and Robotic Arm.

Quality Standards:

  • DIN 2391 Seamless Precison Steel Tubes
  • EN10305 Steel Tubes for Precision Applications Seamless Cold Drawn Tubes
  • ASTM A519 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
  • JIS G3445 Carbon Steel Tubes for Machine Structural Purposes

Grade: ST 52, ST52.3, CK45, E355, 16Mn, STKM13C, SAE1020, SAE1026, SAE1045

Delivery Condition: BK, BK+S, GBK, NBK
ID Size : 20mm – 1500mm
Length: max 13m
Type: Seamless, Hot Rolled, Cold Rolled, Cold Drawn
Straightness: ≤ 0.5/1000
Roughness: 0.2-0.4 u
Tolerance EXT: DIN2391, EN10305, GB/T 1619
Tolerance INT: H7,H8,H9

honed tube chemical composition

honed tube mechanical property

Comments

Post a Comment

Popular posts from this blog

How To Choose The Cylinder Barrel Materials

Image
  The  cylinder barrel   in which the piston operates must be made of a high-strength material, usually steel. It must be as light as possible, yet have the proper characteristics for operating under high temperatures. It must be made of a good bearing material and have high tensile strength. The cylinder barrel is made of a steel alloy forging with the inner surface hardened to resist wear of the piston and the piston rings which bear against it. This hardening is usually done by exposing the steel to ammonia or cyanide gas while the steel is very hot. The steel soaks up nitrogen from the gas, which forms iron nitrides on the exposed surface. As a result of this process, the metal is said to be nitrided. This nitriding only penetrates into the barrel surface a few thousands of an inch. As the cylinder barrels wear due to use, they can be repaired by chroming. This is a process that plates chromium on the surface of the cylinder barrel and brings it back to new standard d...
Read more